Select Page

Staining on the Inside of Genesis Containers

Home Forums Infexion Connexion Staining on the Inside of Genesis Containers

 | Click to Receive Email Notifications of Posts
  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81352
    Lalith Ramachandra
    Participant

    Author:
    Lalith Ramachandra

    Position:

    Organisation:

    State:

    Gday all

    I was wondering if anyone has had an issue with staining of the Genesis steriliser containers as below:

    MESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.

    The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.

    Archive of all messages are available at http://aicalist.org.au/archives – registration and login required.

    Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au

    To send a message to the list administrator send an email to admin@acipc.org.au

    You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.au

    #81353
    Andrew Ellis
    Participant

    Author:
    Andrew Ellis

    Position:
    State Coordinator, Sterilisation & Reprocessing

    Organisation:
    SA Health

    State:

    Hi Lalith,

    Anodised aluminium and other alloys used for rigid sterilisation containers, instrument graphic trays and some coloured anodised RMDs themselves are susceptible to extremes of pH. Some titanium compounds are used to give a matte dark finish on RMDS and these can be affected too. Washer-disinfectors that use a high alkaline detergent with corresponding acidic neutraliser, or an acidic rinse aid, can cause a number of surface changes including loss of colour, a sort of multicoloured, opalescent pattern and in the case of aluminium, a powdery feel to the finish. These tend to be beyond recovery.

    It’s possible that a chemical product from the W-D has pooled or been allowed to stay on the tins for an abnormal time or that rinsing was impeded in some way, perhaps by the other contents in the load. Patterns of the discolouration may point you towards a particular cause. A service of the W-D and a review of loading patterns and practices may help.

    Regards,

    Andrew Ellis
    Sterilising and Reusable Medical Device Reprocessing State Coordinator
    Infection Control Service | Communicable Disease Control Branch
    Health Regulation & Protection
    Department for Health and Wellbeing | Government of South Australia
    Level 13 | 25 Grenfell Street | Adelaide SA 5000
    Ph: (08) 7425 7152 | Mobile: 0435 389 541 | Email: andrew.ellis@sa.gov.au
    HCW infection prevention: http://www.sahealth.sa.gov.au/infectionprevention
    General public: http://www.sahealth.sa.gov.au/hospitalinfections

    This email may contain confidential information, which also may be legally privileged. Only the intended recipient(s) may access, use, distribute or copy this email. If this email is received in error, please inform the sender by return email and delete the original. If there are doubts about the validity of this message, please contact the sender by telephone. It is the recipients responsibility to check the email and any attached files for viruses.

    From: ACIPC Infexion Connexion On Behalf Of Lalith Ramachandra
    Sent: Friday, 16 September 2022 3:24 PM
    To: ACIPCLIST@ACIPC.ORG.AU
    Subject: [ACIPC_Infexion_Connexion] Staining on the Inside of Genesis Containers

    Gday all

    I was wondering if anyone has had an issue with staining of the Genesis steriliser containers as below:

    MESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.

    The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.

    Archive of all messages are available at https://aus01.safelinks.protection.outlook.com/?url=http%3A%2F%2Faicalist.org.au%2Farchives&data=05%7C01%7CAndrew.Ellis%40SA.GOV.AU%7C469848a6d2bf4ce9921808da97a7fc64%7Cbda528f7fca9432fbc98bd7e90d40906%7C1%7C0%7C637989045558903076%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000%7C%7C%7C&sdata=mTHq5JcsRrIotE6Lqo6GPWBXgPrJBa7GqctmLy%2BVTYY%3D&reserved=0 – registration and login required.

    Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au

    To send a message to the list administrator send an email to admin@acipc.org.au

    You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.au

    Any thoughts on whats causing it would be much appreciated.

    They go through the WD first then packed and sterilised in the autoclave.

    Thank you

    Regards

    Lalith Ramachandra
    LR consulting Engineers
    PO Box 40968 Casuarina NT 0811
    P 0401117423

    Sent from LR Consulting Engineers
    MESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.

    The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.

    Archive of all messages are available at https://aus01.safelinks.protection.outlook.com/?url=http%3A%2F%2Faicalist.org.au%2Farchives&data=05%7C01%7CAndrew.Ellis%40SA.GOV.AU%7C469848a6d2bf4ce9921808da97a7fc64%7Cbda528f7fca9432fbc98bd7e90d40906%7C1%7C0%7C637989045558903076%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000%7C%7C%7C&sdata=mTHq5JcsRrIotE6Lqo6GPWBXgPrJBa7GqctmLy%2BVTYY%3D&reserved=0 – registration and login required.

    Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au

    To send a message to the list administrator send an email to admin@acipc.org.au

    You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.au

    MESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.

    The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.

    Archive of all messages are available at http://aicalist.org.au/archives – registration and login required.

    Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au

    To send a message to the list administrator send an email to admin@acipc.org.au

    You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.au

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Infexion Connexion’ is closed to new topics and replies.