Home › Forums › Infexion Connexion › Re: RO water for final rinse AER
- This topic has 0 replies, 1 voice, and was last updated 3 years, 8 months ago by
Lalith Ramachandra.
-
AuthorPosts
-
01/12/2020 at 5:29 pm #77568
Hello Jayne
In the new Palmerston Regional Hospital the water supply to the scope reprocessor (Cantel Medivator) was potable water filtered to 5microns and 1micron.
Need good water pressure and other pre filters in your water supply or they will clog up quickly.
The reprocessor has 0.4 micron and 0.1 micron filters on board.
And the manufacturer advised against using softened water. Specially with the resin Lewatit Monoplus S 107 NS as they leave a brown deposit.
RO water is very expensive and waste 50% of the input water.
Hope this helps.
Cheers
Lalith Ramachandra
Mech Engineer
LR Consulting Engineers
Darwin NT
Ph 0401117423Sent from LR Consulting Engineers
> On 1 Dec 2020, at 3:37 pm, Michael Wishart wrote:
>
> [Posted on behalf of member – Moderator]
>
> Dear Brains Trusts,
>
> In our refurbishments for compliance to AS4187, we are installing new machines for our endoscopy equipment. We now have a decision to make regarding RO water for these machines. Question is do we install RO water for our AER final rinse water?
>
> In view of changes to AS4187 table 7.3 rinse water- washer disinfectors in accordance with ISO 15883-4 for thermal labile endoscopes, now does not mandate this and given manufactures are stating new equipment does not require it because of improved filter systems etc.
>
> Is your organisation installing RO water for the final rinse water for endoscopy for new machines?
>
> if your organisation was to install a new machine where RO water was not available, what would your advice be?
>
> Could I get please get some feedback for your reasons for and against RO installation or not?
>
> What are the issues or decision that made you come to decision for and against?
>
> Many thanks,
>
> Kind Regards
>
> Jayne O’Connor RN ,BSc.,Inf.Cont
>
> IPC Co-Ordinator
>
> Sydney Adventist Hospital | 185 Fox Valley Road, Wahroonga, NSW 2076
>
>
>
> p: +61 2 9480 9732 | f:+61 2 9470 8052 | m: +61 0406 752685 | e: jayne.oconnor@sah.org.au
>
> http://www.sah.org.au
>
>
>
>
>
>
>
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
> MESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.
> The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.
>
> Archive of all messages are available at http://aicalist.org.au/archives – registration and login required.
>
> Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au
>
> To send a message to the list administrator send an email to admin@acipc.org.au
>
> You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.auMESSAGES POSTED TO THIS LIST ARE SOLELY THE OPINION OF THE AUTHOR, AND DO NOT REPRESENT THE OPINION OF ACIPC.
The use of trade/product/commercial brand names through the list is discouraged by ACIPC. If you wish to discuss specific reference to products or services by brand or commercial names, please do this outside the list.
Archive of all messages are available at http://aicalist.org.au/archives – registration and login required.
Replies to this message will be directed back to the list. To create a new message send an email to acipclist@acipc.org.au
To send a message to the list administrator send an email to admin@acipc.org.au
You can unsubscribe manually from this list by sending ‘signoff acipclist’ (without the quotes) to listserv@aicalist.org.au
-
AuthorPosts
- The forum ‘Infexion Connexion’ is closed to new topics and replies.